Contact Us

Your drain pipes do a lot of hard work you never see. Every shower, load of laundry, and flush sends water through a network of pipes that has to carry it away from your home without leaks or backups. When those pipes crack, sag, or wear out, you can end up with slow drains, bad smells, and water damage that gets expensive fast.

At Air Solutions AC & Furnace Repair, Plumbing & Electrical, we’ve been helping homeowners with drain installation in Tulsa, OK, since 1997. Our plumbing team installs new drain piping that’s built to last and sized correctly for your home. Whether you’re replacing a failing line, remodeling a bathroom, or adding a new fixture, we’ll get it done right the first time.

Our Services

Drain pipe repair in progress

WHAT YOUR NEIGHBORS ARE SAYING ABOUT US

John C.
★★★★★
This is the best team of professionals in the state. I am so happy with the service I received. The install team was so helpful. They even carried in my groceries and changed the lightbulb above the garage. Darrel his Brother Mike and the other brother Mike all wore...
Connie K.
★★★★★
We have been customers of Air Solutions for many years now. Their staff is always courteous, friendly and thorough. They go above and beyond to give excellent service with a smile including their tech, Nathan , who checked and serviced our AC system yesterday. What a terrific young man! Thank you Air Solutions!
Charles W.
★★★★★
I had my air conditioning systems serviced today. Nathan was professional, personable and kept me informed. He also answered all of my questions and concerns. He was meticulous, thorough and knowledgeable in his craft. He also gave me a full...
Larry S.
★★★★★
I just received an amazing air conditioning tune-up service offered free during a recent visit to the Tulsa home and garden show. The tech was very thorough providing a complete service. I had already become a member of Air Solutions but if I wasn't, I would have...
Ongoing water leak detection and repair services

Signs You Need New Drain Pipe Installation

Drain problems usually start small and get worse over time. Watch for these warning signs around your home:

  • Frequent slow or clogged drains
  • Gurgling sounds from drains
  • Sewer odors inside the house
  • Water stains on walls or ceilings
  • Damp spots near your foundation
  • Multiple fixtures backing up together
  • Visible rust or cracked pipes
  • Recurring clogs after professional cleaning

Tulsa’s soil is a big reason drain lines fail here. Much of the area sits on red clay that swells when it’s wet and shrinks during dry spells. That constant movement puts stress on underground and under-slab pipes, which can lead to cracks, separated joints, and low spots where waste collects.

Age is another factor. Many homes in midtown neighborhoods like Maple Ridge, Brookside, and Florence Park still have original cast-iron or clay drain lines. Some homes built between the 1940s and 1970s may even have Orangeburg pipe, a fiber-based material that tends to soften and collapse over time. If your home is older and you’re having recurring drain problems, it may be time for new piping.

Ongoing drain pipe repair

Drain Pipe Material Options

The right material depends on where the pipe is going, your home’s age, and your budget. The most common drain pipe materials include:

  • PVC pipe
  • ABS pipe
  • Cast iron pipe

PVC is the most common choice for new residential drain lines. It’s lightweight, affordable, and rust- and corrosion-resistant. PVC has smooth inner walls that help waste flow freely, and it holds up well in the shifting clay soil throughout the Tulsa area when properly bedded and supported.

ABS is another plastic option that works well for drain, waste, and vent lines. It’s tough and handles impacts well, though it’s used less often than PVC in many homes. We’ll let you know if it’s a good fit for your project.

Cast iron is still a solid option in certain spots. It’s heavy, durable, and much quieter than plastic, which makes it a good pick for drain lines running through walls near bedrooms or living areas. When we replace sections of an older cast iron system, we can tie new pipe into the existing lines with the proper fittings so everything connects securely.

Expert drain cleaning underway

Our Drain Pipe Installation Process

Every job starts with a close look at your current plumbing. We inspect the existing drain lines to identify the source of the problem and determine how much pipe needs to be replaced. Then we walk you through what we found and give you an honest recommendation. If a smaller repair will do the job, we’ll tell you.

Once you’re ready to move forward, we plan the new layout. Drain lines need the right slope to work properly, usually about a quarter-inch drop for every foot of pipe. Too little slope and waste sits in the line. Too much water runs ahead of the solids, which leads to clogs.

On installation day, we protect your floors and work area before we get started. We remove the old pipe, prepare the area, and install the new lines with secure joints and proper support. For underground runs, we pay close attention to bedding the pipe so it can handle Tulsa’s shifting clay without sagging over time.

Before we finish, we test the new drain lines for leaks and proper flow. We’ll run water through the system and check every connection. Then we clean up the work area and make sure you’re comfortable with how everything turned out.

Plumber performing drain cleaning service

Benefits of Properly Installed Drain Piping

The biggest benefit is reliable drainage. New, properly sloped pipes move water and waste out of your home as they’re supposed to. That means fewer clogs, fewer backups, and fewer emergency calls on holidays and weekends.

Proper drain piping also helps protect your home. Leaking drain lines can soak walls, floors, and your foundation for months without you noticing. In a humid climate like Tulsa’s, that hidden moisture can lead to mold, rot, and musty smells that are tough to get rid of. A solid drain system keeps that water where it belongs.

You’ll also notice a cleaner, healthier home. Cracked drain pipes can let sewer gases into your living space, causing unpleasant odors. New pipes with tight connections keep those smells out. Modern materials also last for decades, so you won’t have to worry about your drains for a long time.

Why Choose Air Solutions AC & Furnace Repair, Plumbing & Electrical

What started with a $500 pickup truck has grown into a 36-person team serving homes and businesses across the Tulsa metro. Here’s why homeowners keep calling us:

Frequently Asked Questions

How long do drain pipes last?

It depends on the material. PVC can last for decades, while older cast iron and clay lines often wear out sooner.

Shifting clay soil, tree roots, aging materials, and freezing winter temperatures are common causes.

Yes. If the rest of the system is in good shape, we can replace only the damaged section.

PVC is the most common choice for homes. Cast iron is a good option where noise reduction matters.

Yes. We’re available 24/7 for drain backups and other plumbing emergencies.